
Add to Cart
FC120 series inverter has the following characteristics:
advanced vector control algorithm;
vector control mode 0 has better low-speed stability, low torque output greater capacity and better dynamic
response;
richer functionality;
multispeed control,simple PLC,PID control module and pulse count;
stable and reliable anti-trip function;
stable and reliable over-voltage, over-current stall control algorithm, momentary power without stopping the
machine control, to prevent tripping frequently in complex applications.
This manual describes the features and how to use FC120 series inverter, including product selections, parameter
setting, run debugging, troubleshooting and routine maintenance and other related matters. Please give the user or
maintainer of the machine and keep it.
It can be use for single phase output directly.
Model List,
Products Specifiction,
Maximum frequency | 0~600Hz |
Carrier frequency | 2.0kHz~10.0kHzAccording to the load characteristics, carrier frequency can be adjusted automatically |
Input frequency resolution | Digital setting: 0.01Hz,Analog setting: X0.025% Maximum frequency |
Control mode | 0:V/F control 1:vector control 0: control |
Start torque | 1.0Hz/150% |
Speed range | 1:50 (vector mode 0) |
Overload capability | 120% rated current for 1 hour, 150% rated current for 60s, 180% rated current for 4s |
Torque boost | Auto Torque boost , Manual Torque boost 0.1% to 10% |
V F curve | Line , Multi-point , Square V/F curve , V / F separation |
Accelerate/Decelerate curve | Line or S-curve Acc/Dec mode : four kinds of Acc/Dec time,Range of Acc/Dec Time : 0.0 to 3600.0s |
DC brake | DC brake frequency : 0.00Hz ~ Maximum frequency Brake current value : 0.0 to 150% Brake time : 0.0 ~ 50.0s |
Jog control | Jog frequency range:0.00Hz~50.00Hz |
Simple PLC Multi-speed running | 16-speed operating through control terminal |
Built-in PID | Close loop control system can be formed easily by using PID |
Automatic voltage regulating (AVR) | Output voltage is regulated when voltage of the power network changes |
Overvoltage , Overcurrent stall control | During the inverter running , output current and bus voltage is limited automatically to prevent frequent overcurrent and overvoltage trip |
Fast current limiting function | Minimize reduce overcurrent fault inorder to protect inverter running |
Bus Support | Modbus communication with international standards |
Command source | Keyboard reference,control terminal reference,serial communication port reference,can be switched by a variety of ways |
Frequency source | Nine frequency sources :digital fererence,analog voltage reference, analog current reference,pulse reference,serial communication por treference ,can be switched by a variety of ways |
Auxiliary frequency sources | Nine auxiliary frequency sources ,Flexibility to implement auxiliary frequency tuning, frequency synthesizer |
Input terminal | Five digital input terminals(S1~S5), one high-speed pulse(HDI) support max 50kHz input ,One analog input terminals(AI1) can support0~10V voltage input or 0~20mA current input |
Output terminal | One digital output terminals,One relay output terminal ;One analog output terminal , support 0~20mA current output or 0~10V voltage output |
Key Lock and function selection | Achieve some or all of the keys locked, delimit fuctions some or all of keys to prevent erroneous operation |
Protection function | Input/output phase failure protection ,Over- current protection ;Over- voltage protection;Under- voltage protection; Over- heat protection ; Over-load protection |
1. Can I get some samples?
Yes, Sample order is available for quality check and market test .But you have to pay for it .
2. What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order .
3. What's your payment terms?
We usually accept all kinds of payment terms .Such as T/T,L/C, Western Union.Cash.
4. What's your warranty terms?
We offer 24 months warranty time .
5. Do you have the products in stock?
Depends on your request ,We have standard models in stock. Some special products and big order will be newly produced according to your order .
6. Can I mix different power in one container .
Yes ,Different models can be mixed up in one container ,even one order .
7. How does your factory do the quality control?
Quality is priority ,we always attach the importance to quality control from the beginning to the end of the production .every product will be fully assembled and carefully tested before packing and shipping .
8. Can you sell spare parts ?
If you are using our products .we can sell spare parts to you . But we couldn't sell the half-finished products.
9.I would like to know if you have a partner for export?
Yes .We have the right to export and can sell electrical product all over the world..
10. Can you make the inverter and soft starter control boards (switchgear)?
Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request,and our factory can do soft starter by ourselves.
11.Can the inverter connect with computer?
Yes .All inverters have built-in RS485 port .and support Modbus communication protocol.
12.How can I trust you ?
Our company has been audited and approved ISO9001,CE.CCC. Assessment report will could be sent to you by e-mail. and we will take all the responsibility once problem during warranty time.