Janson Controls Technologies (Shenzhen) Co.,Limited
24 Months Warranty Frequency Inverter Factory
Add to Cart
FC280 series frequency inverter has the following features:
Closed-Loop Vector Control ( +PG Card)
Robust design, high start torque
Can do big kilowatt ( around 1300KW)
Infenion Brand IGBT Inside Only
Total failure ratio <1%.
Built In MODBUS
Built In C3 EMC Filter
General Purpose Series & Off Grid Solar Pump Inverters & Elevator Inverters
FC280 & SI200 & FC280E
Diagram Wire
Model : ( Three-Phase 380V Range: -15%~20%)
Inverter Model | Capacity Power | Input Current | Output Current | Adoptable Motor |
| FC280-4T-0.7G | 1.5KVA | 3.4A | 2.3A | 0.75KW |
| FC280-4T-1.5G | 3.0 | 5.0 | 3.7 | 1.5 |
| FC280-4T-2.2G | 4.0 | 5.8 | 5.1 | 2.2 |
| FC280-4T-4.0G | 5.9 | 10.5 | 8.5 | 4.0 |
| FC280-4T-5.5G | 8.9 | 14.6 | 13 | 5.5 |
| FC280-4T-7.5G | 11 | 20.5 | 17 | 7.5 |
| FC280-4T-11.0G | 17 | 26.0 | 25 | 11 |
| FC280-4T-15G | 21 | 35.0 | 32 | 15 |
| FC280-4T-18.5G | 24 | 38.5 | 37 | 18.5 |
| FC280-4T-22G | 30 | 46.5 | 45 | 22 |
| FC280-4T-30G | 40 | 62.5 | 60 | 30 |
| FC280-4T-37G | 57 | 76.0 | 75 | 37 |
| FC280-4T-45G | 69 | 92.0 | 91 | 45 |
| FC280-4T-55G | 85 | 113 | 112 | 55 |
| FC280-4T-75G | 114 | 157 | 150 | 75 |
| FC280-4T-90G | 134 | 180 | 176 | 90 |
| FC280-4T-110G | 160 | 214 | 210 | 110 |
| FC280-4T-132G | 192 | 256 | 253 | 132 |
| FC280-4T-160G | 231 | 307 | 304 | 160 |
| FC280-4T-185G | 255 | 333 | 330 | 185 |
| FC280-4T-200G | 287 | 380 | 377 | 200 |
| FC280-4T-220G | 311 | 429 | 426 | 220 |
| FC280-4T-250G | 355 | 470 | 465 | 250 |
| FC280-4T-280G | 396 | 525 | 520 | 280 |
| FC280-4T-315G | 439 | 605 | 600 | 315 |
| FC280-4T-350G | 479 | 665 | 660 | 350 |
| FC280-4T-400G | 530 | 730 | 725 | 400 |
| FC280-4T-450G | 600 | 825 | 820 | 450 |
| FC280-4T-500G | 660 | 910 | 900 | 500 |
Products Specifiction:
| Basic Function | Specification |
| Maximum output frequency | 0~600Hz |
| Carrier frequency | 2.0kHz~10kHz;According to the load characteristics, carrier frequency can be adjusted automatically |
| Input frequency resolution | Digital setting : 0.01Hz Analog setting : Maximum frequency x0.025% |
| Control mode | 0:V/F 1:Vector mode 0 control |
| Speed range | 1:50(Vector mode 0 ) 1Hz/150% rated torque |
| Overload capability | G type:150% rated current for 60s; P type:110% rated current for 60s. |
| Torque boost | Auto Torque boost Manual Torque boost ; 0.1%~20.0%. |
| V/F curve | Four modes : Line , Multi-point , Square V/F curve,V/F separation |
| Jog control | Jog frequency range:0.00Hz to F00.03(Max frequency) |
| Accelerate/Decelerate curve | Line or S-curve Acc/Dec mode ,four kinds of Acc/Dec time Range of Acc/Dec Time0.0~6000.0s. |
| DC brake | DC brake frequency : 0.00Hz to Maximum frequency brake time : 0.0 to 100.0s brake current value : 0.0 to 150% |
| Simple PLC, Multi-speed | 16-speed operating through built-in PLC or control terminal |
| Built-in PID | Close loop control system can be formed easily by using PID |
| Automatic voltage regulating (AVR) | Output voltage is regulated when voltage of the power network changes |
| Overvoltage and overcurrent stall control | During operation automatically limits the inverter output current and bus voltage, to prevent fan overcurrent and overvoltage trip. |
| Rapid current limiting function | Minimizing flow failures, protect the normal operation of the inverter |
| Instantaneous stop non-stop | Load feedback energy compensation voltage is reduced and continue to maintain a short time when change is momentarily interrupted. |
| Speed tracking start | For high-speed rotation of the motor speed identification, impact- free smooth start |
| Rapid current limit | Rapid software and hardware limiting technology to avoid frequent converter overcurrent fault. |
| Virtual IO | Four sets of virtual DO,five sets of virtual DI, enables easy logic control. |
| Timing Control | Timing control: set the time range 0.0Min~6500.0Min |
| Multi-motor switch | Two independent motor parameters, enabling two motors switching control |
| Bus Support | Two independent Modbus communication, Profibus-DP |
| Motor overheating protection | Optional IO expansion card 1, analog input T_Motor(AI5) acceptable the input of motor temperature sensor .(PT100,PT1000) |
| Command source | Given the control panel, control terminal, serial communication port given. It can be switched by a variety of ways. |
| Torque boost | Auto Torque boost Manual Torque boost ; 0.1%~20.0%. |
| Frequency source | Eleven kinds of frequency sources: digital setting, analog voltage setting, analog current setting, pulse setting, or serial port and so on. It can be switched by a variety of ways. |
| Auxiliary frequency source | Eleven kinds of auxiliary frequency source. Flexible implementation of auxiliary frequency tuning, frequency synthesis. |
| Input terminal | Standard: Six digital input terminals, one only supports 50khz high pulse input Three analog input terminals,two support -10V~10V voltage input One support 0 ~ 10V voltage input or 0 ~ 20mA current input Expansion capability: Two digital input terminals One analog input terminal, support -10V ~ 10V voltage input, and supports PT100 / PT1000 |
| Output terminal | Standard: One high-speed pulse output terminal (optional open collector type), support of square wave 0 ~ 50kHz signal output One digital output terminal Two relay output terminals Two analog output terminals, support 0 ~ 20mA current output or 0 ~ 10V voltage output Expansion capability: One digital output terminal One relay output terminal One analog output terminal, support 0 ~ 20mA current output or 0 ~ 10V voltage output |
| Display and operation | |
| LED display | Display parameters and status information |
| The key lock and function selection | Achieve some or all of the keys locked, scope definition section keys to prevent misuse. |
| Protection function | Input/output phase failure protection ,Overcurrent protection ;Over voltage protection; Undervoltage protection; Overheat protection ; Overload protection |
| Options | Brake assembly, simple IO expansion cards, multi-IO expansion card |
| Environment | |
| Application environment | In-door , free from direct sunlight , dust , corrosive gas , combustible gas ,oil mist , steam , water drop and salt . |
| Altitude | Lower than 1000m |
| Vibration | Less than 5.9m/s(0.6g) |
Control Terminal
| DIGITAL INPUT | S1 | digital input 1 | 1,Optical coupling isolation,compatible with dual polarity input 2, input impedance: 24KΩ 3,votalge range input: 9V~30V |
| S2 | digital input 2 | ||
| S3 | digital input 3 | ||
| S4 | digital input 4 | ||
| S5 | digital input 5 | ||
| S6 | digital input 6 | ||
| Power Supply | +10V-ACM | External +10V | Current: 10mA |
| P24V-DCM | External + 24V | Provide +24V to external Unit | |
| Analog Input | AI1-ACM | Analog input 1 | 1, Input Range: DC 0V~10V/0mA~20mA 2,Impedance:22KΩ (voltage Input), 500Ω |
| AI2-ACM | Analog input 2 | ||
| AI3-ACM | Analog input 3 | ||
| Analog output | A01-ACM | Analog output 1 | Output Voltage Range:0V~10V Output Current Range:0mA~20mA |
| A02-ACM | Analog output 2 | ||
| Relay Output | TA-TB-TC | Relay 1 | Relay output 1 |
| RA-RB-RC | Relay 2 | Relay output 2 | |
| MO1-DCM | Multi-Function Open Conllector | ||
Products Advantage
Adding PG card and Encoder Control
Name Card
Normal Questions:
1. Can I get some samples?
Yes, Sample order is available for quality check and market test .But you have to pay for it .
2. What's delivery time?
It usually takes about 3-5 working days for small order and 10-15 days for big order .
3. What's your payment terms?
We usually accept all kinds of payment terms .Such as T/T,L/C, Western Union.Cash.
4. What's your warranty terms?
We offer 24 months warranty time .
5. Do you have the products in stock?
Depends on your request ,We have standard models in stock. Some special products and big order will be newly produced according to your order .
6. Can I mix different power in one container .
Yes ,Different models can be mixed up in one container ,even one order .
7. How does your factory do the quality control?
Quality is priority ,we always attach the importance to quality control from the beginning to the end of the production .every product will be fully assembled and carefully tested before packing and shipping .
8. Can you sell spare parts ?
If you are using our products .we can sell spare parts to you . But we couldn't sell the half-finished products.
9.I would like to know if you have a partner for export?
Yes .We have the right to export and can sell electrical product all over the world..
10. Can you make the inverter and soft starter control boards (switchgear)?
Yes. We have a lot of experience to design frequency inverter and soft starter cabinet according to your request,and our factory can do soft starter by ourselves.
11.Can the inverter connect with computer?
Yes .All inverters have built-in RS485 port .and support Modbus communication protocol.
12.How can I trust you ?
Our company has been audited and approved ISO9001,CE.CCC. Assessment report will could be sent to you by e-mail. and we will take all the responsibility once problem during warranty time.